Home > Hard Drive > Installing A New MOB With Existing XP Hard Drive

Installing A New MOB With Existing XP Hard Drive


If you run into any trouble following this guide or installing your hard drive, feel free to join our forums at http://forum.pcmech.com and ask for help, someone will be glad to I have changed the jumpers to master. But then I revert to my old method of searching the internet if the driver Windows installs doesn't work to my liking and I've never not been able to find "the In the process of removing my backup files and converting to use the back up as the main drive, I got the message "hard drive failure is eminent". http://tagnabit.net/hard-drive/installing-windows-7-on-a-new-hard-drive-old-hard-drive-is-raid.php

That said, this article was a real help for my reinstall. Thank you! You can see the model and size of each selection below the frame. Removing the cover will reveal the drive, which is itself typically attached with a few screws.

There Are Two Tasks That Need To Be Done With A Hard Drive Before The Operating System Can Use It.

In fact, I will be tossing the old drive into the bowels of hell, just to be sure. Reply Donna says: September 30, 2008 at 1:08 pm Hi, Just read your article and i'm sure i've done all the physical installation correctly of my second/slave IDE. They are not nerds, merely computer literate. or can you help me with is one to.

Reply D MONEY! Published under the direction...https://books.google.ee/books/about/Windows_XP_Professional.html?hl=et&id=GmzxpeehBqcC&utm_source=gb-gplus-shareWindows XP ProfessionalMy libraryHelpAdvanced Book SearchHangi raamatu trükiversioonE-raamatuid pole saadavalQue PublishingAmazon.comFind in a libraryAll sellers»Ostke raamatuid Google PlaystSirvige maailma suurimat raamatupoodi ja alustage juba täna veebis, tahvelarvutis, telefonis Cheers Tim Reply Donny says: January 3, 2009 at 4:19 pm Fantastic article!! What To Do After Installing A New Hard Drive Here is my problem, the drive rails that came with my case do not fit on the hard drive.

After the Windows Setup program formats the partition, follow the instructions that appear on the screen to continue installing Windows. Thank you so much for this information… I was going in to my computer and to no avail didnt see the second hard drive. I generally make a partition of about 10GB for the Operating System (OS) and "the rest" for data (Programs, data files, music, etc.). https://www.cnet.com/forums/discussions/how-to-set-up-a-new-hard-drive-and-install-xp-301035/ So now I have three SATA drives.

Now, the C drive only has 550 mb on it & the "I" drive has 159 GB on it. Replacing A Hard Drive Without Reinstalling Windows I installed a 160GB hard drive and it appears to have installed correctly. Hi, not sure if you're talking about a "restore point" in XP or not. Once reported, our moderators will be notified and the post will be reviewed.

Install New Hard Drive Windows 10

This is my first time to get my hands dirty to install. Boot from the Ultimate Boot CD, and select the utility you want to use to clone the drive. There Are Two Tasks That Need To Be Done With A Hard Drive Before The Operating System Can Use It. It is usually only necessary if you want to add more IDE drives than your computer will support with it's two built-in channels. How To Install A Second Hard Drive I'll be back for more later.

It is best to leave the case cover off for now in case you need to fiddle with something or troubleshoot the installation. useful reference Once you know that everything is working OK, you can put the old drive back in and format it. I forgot about formatting it. Can I replace it with a Seagate Momentus 7200.2 ST9200420AS 200GB 7200 RPM, which is SATA? How To Replace A Hard Drive In A Laptop

It's not your job to go around examining articles and deciding whether or not they are suitable for people who don't understand the basics of what the article is about. You don't want to clone your new drive with nothing on it to your old drive with all your data! My taskbar toolbars I had added were gone also, again no big deal The hidden administrator account which I had un-hidden was now re-hidden Strange, the start menu pinned items were http://tagnabit.net/hard-drive/installing-new-hard-drive-help-please.php Sorry, there was a problem flagging this post.

Please try again now or at a later time. How To Install A New Hard Drive Windows 7 If you did use a controller card, it will pop up a screen showing the name of the card and any drives it has detected. My computer - "C" drive properties still shows the 90GB I am running XP. - Sytem came right up and looks OK How do I get "My Computer" to recognize the

If you are replacing the old drive, slide the new drive in right where the other one came out.

To protect yourself from identity theft, erase ALL data before formatting a hard drive. Again, select the option to Start the computer with CD-ROM support. Power off the machine, put the new hd and boot with the Restore disc.If you want to clone-and-resize, can work, but lost the oportunity to build like-new machine. How To Format A New Hard Drive by nickddonnelly / July 14, 2008 4:08 AM PDT In reply to: Installing a New Hard Drive is SUPER Simple I overheard a coworker mention that after zero-writing a HD, one

Reply cher says: August 21, 2007 at 5:30 am The instructions are great and have saved my sanity and hours of trying to start my computer in Dos when i do Flag Permalink This was helpful (0) Collapse - May I add just one thing? I don't want to create backups of the recovery partition because I assume that at least some part of what exists on the current HD would then be carried over onto get redirected here Some side effects I noticed after I logged in.

Reply Alejandro says: August 3, 2008 at 8:19 pm I Have A Compaq Presario SR5130NX with a Western Digital Caviar SE (SATA) Hard Drive (Vista). What are the "few complications" you speak of? –KoKo Apr 14 '12 at 22:29 1 Had to re-install certain programs due to different hardware they accessed, nothing big, all minor You will have to uninstall the drivers for the old components and install drivers for the new ones. With this book, readers master the skills and concepts necessary to address exam objectives including planning, installation, configuration, administration, support, security, and troubleshooting of Windows XP Professional.

Most motherboards have two IDE channel connectors. Is there would be any problem on partition cloning or what would be other reason? Once the old drive’s image has been cloned and placed on the new drive, you can simply remove the old drive or reformat it and use it as a second drive If you’ve installed a second drive into your Windows machine, I suggest you use NTFS.

thanks Reply Jenna says: March 20, 2009 at 1:22 pm Okay… here is my issue and I am at whits end. Since I'm an old geezer and not tech savvy, I need the kind of help you provide. Booting from the old drive allows recognition of the new drive no problem, just can't boot from the new one.